MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

Brand: Mr. Hobby
Item Code: HUG01 - HUG08
Volume: 10ml
Type: Semi Gloss

1. Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. 
2. Yet, we recommend to use dedicated thinner in order to retain 100% of the original paint performance.
3. The solvent contained in Aqueous Hobby Color paint is very mild.
4. It provides a glossy texture and very good levelling qualities (ie the smoothness of coated film of paint), resulting in a very good level of painted finish. 
5. Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.
6. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.
7. It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).
8. When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.
9. If painting a light color over a darker base surface, more coats of paint may be required.

Variation

1. HUG01 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam White 10ml 
2. HUG02 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Blue 10ml
3. HUG03 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Yellow 10ml
4. HUG04 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Red 10ml 
5. HUG05 - Mr Hobby Aqueous Color Gundam Color Char\'s Personal Color Pink 10ml
6. HUG06 - Mr Hobby Aqueous Color Gundam Color Red for Char Aznable 10ml 
7. HUG07 - Mr Hobby Aqueous Color Gundam Color Phantom Gray 10ml 
8. HUG08 - Mr Hobby Aqueous Color Gundam Color Titans Blue 1 10ml 
9. HUG09 - Mr Hobby Aqueous Color Gundam Color Titans Blue 2 10ml 

Mr Hobby Aqueous Surfacer 1000 Gray - B611 / White - B612 / Black - B613 / 500 White - B614

????Brand: Mr Hobby

????Variation:

- Mr Hobby Aqueous Surfacer 1000 Gray HSF01

- Mr Hobby Aqueous Surfacer 1000 White HSF02

- Mr Hobby Aqueous Surfacer 1000 Black HSF03

- Mr Hobby Aqueous Surfacer 500 White HSF04

Additional Information

????Mr. Surfacer is an internationally famous brand name for reducing the presence of small scratches and leveling a surface in preparation for painting

????It also acts as a primer allowing for better paint adhesion and provides a fine neutral color to eliminate the effects of the original subject\'s coloring affecting the paint\'s hue

????Comes in different particle sizes (higher the number, the finer the particles)

????Aqueous version is water based with a less chemical scent compared to regular Mr. Surfacer.

????Mr. Aqueous Surfacer 1000 Finer than the 500 series fills minor imperfections

Mr Hobby Aqueous Surfacer 1000 Gray - B611 / White - B612 / Black - B613 / 500 White - B614

????Brand: Mr Hobby

????Variation:

- Mr Hobby Aqueous Surfacer 1000 Gray HSF01

- Mr Hobby Aqueous Surfacer 1000 White HSF02

- Mr Hobby Aqueous Surfacer 1000 Black HSF03

- Mr Hobby Aqueous Surfacer 500 White HSF04

Additional Information

????Mr. Surfacer is an internationally famous brand name for reducing the presence of small scratches and leveling a surface in preparation for painting

????It also acts as a primer allowing for better paint adhesion and provides a fine neutral color to eliminate the effects of the original subject\'s coloring affecting the paint\'s hue

????Comes in different particle sizes (higher the number, the finer the particles)

????Aqueous version is water based with a less chemical scent compared to regular Mr. Surfacer.

????Mr. Aqueous Surfacer 1000 Finer than the 500 series fills minor imperfections

Mr Hobby Aqueous Surfacer 1000 Gray - B611 / White - B612 / Black - B613 / 500 White - B614

????Brand: Mr Hobby

????Variation:

- Mr Hobby Aqueous Surfacer 1000 Gray HSF01

- Mr Hobby Aqueous Surfacer 1000 White HSF02

- Mr Hobby Aqueous Surfacer 1000 Black HSF03

- Mr Hobby Aqueous Surfacer 500 White HSF04

Additional Information

????Mr. Surfacer is an internationally famous brand name for reducing the presence of small scratches and leveling a surface in preparation for painting

????It also acts as a primer allowing for better paint adhesion and provides a fine neutral color to eliminate the effects of the original subject\'s coloring affecting the paint\'s hue

????Comes in different particle sizes (higher the number, the finer the particles)

????Aqueous version is water based with a less chemical scent compared to regular Mr. Surfacer.

????Mr. Aqueous Surfacer 1000 Finer than the 500 series fills minor imperfections

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

Unlock the Full Potential of GGX and Metallic Paints

The Mr.Hobby T217 Mr.Color GGX Rapid Thinner is a specialized high-performance solvent designed specifically to accompany the new generation of Mr. Color GGX paints. While standard thinners work well for general purpose painting, the GGX Rapid Thinner is engineered with a faster evaporation rate that drastically alters the final finish of your model, making it an essential tool for advanced finishing techniques.

Why Choose GGX Rapid Thinner?

• Essential for Mr. Color GGX Series: The new GGX paint formulation requires a specific solvent balance to perform correctly. This thinner ensures proper solubility and adhesion that standard thinners may not provide for the GGX line.

• Superior Metallic Finishes: This is the secret weapon for metallic painting. Because the thinner dries rapidly, it \"locks\" metallic pigments in place quickly. This prevents the heavy metallic flakes from sinking or drifting during the drying process, resulting in a uniform, realistic metal sheen rather than a \"glittery\" or uneven texture.

• True Matte Results: When used with flat/matte paints, the rapid drying time prevents the paint from self-leveling into a semi-gloss surface. The result is a deeper, more velvet-like matte finish.

• Speed Up Your Workflow: Drastically reduces drying time between coats, allowing for faster layering and masking sessions without long waits.

Best Applications

• Mr. Color GGX Paints: The primary thinner recommended for this line.

• Metallic Paints (Standard Mr. Color): Use this instead of Leveling Thinner when you want a crisp, high-intensity metallic reflection.

• Matte/Flat Paints: Perfect for military models, fabric textures, and non-reflective surfaces.

• Camouflage: The quick drying time helps prevent runny edges when freehanding intricate camouflage patterns.

Usage Tips

• Ratio: Start with a 1:1 to 1:2 (Paint : Thinner) ratio for airbrushing, adjusting based on your specific PSI and needle size.

• Note for Gloss Finishes: Because this thinner dries very quickly, it inhibits the \"self-leveling\" process required for a glass-smooth mirror finish. For high-gloss car bodies or candy coats, it is recommended to use Mr. Leveling Thinner instead.

Product Specifications

• Brand: Mr. Hobby (GSI Creos)

• Product Code: T217

• Volume: 400ml (Large format bottle)

• Type: Lacquer Solvent Thinner

• Compatibility: Mr. Color GGX, Mr. Color (Standard), Mr. Color GX, and Mr. Metal Color.

The Standard-Setter for High-Gloss GGX Finishes

The Mr.Hobby T204 Mr.Color GGX Thinner is the primary solvent designed exclusively for the revolutionary Mr. Color GGX paint series. Unlike the T217 Rapid Thinner, which focuses on quick drying for metallics and mattes, the T204 formula is engineered to extend drying time slightly, allowing the paint to self-level. This creates the glass-smooth surface essential for high-gloss finishes and vehicle modeling.

Why Choose the Standard T204 GGX Thinner?

• Optimized for Gloss & Semi-Gloss: This thinner is formulated to dry at a moderate pace. This \"open time\" allows the paint to settle and level out before it cures, eliminating brush strokes or orange peel texture. It is the default choice for achieving a mirror-like shine.

• Essential Chemistry for GGX: The GGX line uses a renewed solvent and resin structure that differs from classic Mr. Color. Using older thinners (like standard T104) may lead to poor solubility or separation. T204 guarantees the correct chemical bond for the strongest finish.

• Future-Proof Formulation: Developed with new environmental standards in mind, this thinner utilizes a different solvent blend that is compliant with modern regulations, often resulting in a slightly reduced odor compared to traditional lacquer thinners.

• Smooth Airbrush Flow: Prevents \"tip dry\" better than the Rapid version, making it easier to spray consistent, wet coats over large surface areas without clogging the needle.

Best Applications

• Mr. Color GGX Gloss Paints: The mandatory thinner for high-gloss colors (e.g., GGX Black, Gloss Clear).

• Car and Motorcycle Models: Essential for achieving the \"wet look\" on body shells where surface smoothness is critical.

• General Painting: Excellent for standard camouflage or character models where you do not require a flat/matte texture immediately.

Usage Tips

• Mixing Ratio:

  • Gloss/Semi-Gloss: Start with a 1:1 ratio (Paint : Thinner).

  • Matte/Flat: If using this thinner with matte paints, you may need a slightly higher ratio (1:1.25) to ensure it lays down smoothly, though T217 Rapid is generally preferred for matte.

• Drying Time: Allow more time for curing compared to standard lacquers. Because of the leveling agents, the paint surface remains \"active\" longer to smooth itself out.

• Compatibility: While designed for GGX, it can dilute standard Mr. Color paints, but standard thinners should not be used to dilute GGX paints.

Product Specifications

• Brand: Mr. Hobby (GSI Creos)

• Product Code: T204

• Volume: 400ml (Large economy size)

• Type: Lacquer Solvent Thinner (GGX Series)

• Finish Focus: Gloss / Self-Leveling

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: MoShi

Item Code: MS026

Variation

D001 Mecha Black Oil-based Dual-Head Marker Pen

D002 Mecha White Oil-based Dual-Head Marker Pen

D003 Mecha Red Oil-based Dual-Head Marker Pen

D004 Mech Yellow Oil-based Dual-Head Marker Pen

D005 Zaku Green Oil-based Dual-Head Marker Pen

D006 Methane Blue Oil-based Dual-Head Marker Pen

D007 Mech Orange Oil-based Dual-Head Marker Pen

D008 Skeleton Grey Oil-based Dual-Head Marker Pen

D009 Skeleton Dark Grey Oil-based Dual-Head Marker Pen

D010 Mecha Purple Oil-based Dual-Head Marker Pen

D011 Desert Yellow Oil-based Dual-Head Marker Pen

D012 Maiden Pink Oil-based Dual-Head Marker Pen

12 colors to suit most painting needs

Dual-head design, one head for details, one head for large areas.

High-quality nylon hard tip Even color application without leaving brush marks Smooth and even paint output, more durable and colorful No residue of debris, flat paint surface

Instructions for use

Clean the surface of the workpiece before use. The smoother the surface of the workpiece, the better the colorings effect.

Shake the pen for 1 minute before use. Press the pen tip to let the paint flow out smoothly.

After the nib has fully absorbed the ink, spread it evenly.

Fine tip for colorings narrow areas of the model.

Coarse round tip For colorings large areas of the model.

*Note: The complete drying time is 24 hours, please do not touch during this period.

Brand: Mr. Hobby
Item Code: HUG01 - HUG09
Volume: 10ml
Type: Semi Gloss

1. Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. 
2. Yet, we recommend to use dedicated thinner in order to retain 100% of the original paint performance.
3. The solvent contained in Aqueous Hobby Color paint is very mild.
4. It provides a glossy texture and very good levelling qualities (ie the smoothness of coated film of paint), resulting in a very good level of painted finish. 
5. Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.
6. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.
7. It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).
8. When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.
9. If painting a light color over a darker base surface, more coats of paint may be required.

Variation

1. HUG01 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam White 10ml 
2. HUG02 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Blue 10ml
3. HUG03 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Yellow 10ml
4. HUG04 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Red 10ml 
5. HUG05 - Mr Hobby Aqueous Color Gundam Color Char\'s Personal Color Pink 10ml
6. HUG06 - Mr Hobby Aqueous Color Gundam Color Red for Char Aznable 10ml 
7. HUG07 - Mr Hobby Aqueous Color Gundam Color Phantom Gray 10ml 
8. HUG08 - Mr Hobby Aqueous Color Gundam Color Titans Blue 1 10ml 
9. HUG09 - Mr Hobby Aqueous Color Gundam Color Titans Blue 2 10ml 

Brand: Mr. Hobby
Item Code: HUG01 - HUG08
Volume: 10ml
Type: Semi Gloss

1. Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. 
2. Yet, we recommend to use dedicated thinner in order to retain 100% of the original paint performance.
3. The solvent contained in Aqueous Hobby Color paint is very mild.
4. It provides a glossy texture and very good levelling qualities (ie the smoothness of coated film of paint), resulting in a very good level of painted finish. 
5. Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.
6. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.
7. It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).
8. When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.
9. If painting a light color over a darker base surface, more coats of paint may be required.

Variation

1. HUG01 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam White 10ml 
2. HUG02 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Blue 10ml
3. HUG03 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Yellow 10ml
4. HUG04 - Mr Hobby Aqueous Color Gundam Color RX-78-2 Gundam Red 10ml 
5. HUG05 - Mr Hobby Aqueous Color Gundam Color Char\'s Personal Color Pink 10ml
6. HUG06 - Mr Hobby Aqueous Color Gundam Color Red for Char Aznable 10ml 
7. HUG07 - Mr Hobby Aqueous Color Gundam Color Phantom Gray 10ml 
8. HUG08 - Mr Hobby Aqueous Color Gundam Color Titans Blue 1 10ml 
9. HUG09 - Mr Hobby Aqueous Color Gundam Color Titans Blue 2 10ml 

• MR HOBBY COLOR MSC

  B523 UV CUT SUPER CLEAR FLAT MATT

  Vol: 170ml

  Condition:New

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. 

The putty is gray in color and may be applied with a flat surface tool. 

Note: 

Tamiya’s basic type putty is not intended to fill large gaps. It is meant to fill in seams and imperfections in plastic model surfaces. The basic putty may also be used for resin model, metal model and vinyl model applications. 

• Apply the mark setter to the position where decal is to be stuck.
• Stick a slide mark
• Spread it evenly and remove water with a swab, etc.
• Apply the mark softer on it, remove water again.

In the past, Mr. MARK SOFTER was used simply to soften decals. 

However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models. 

First, the area to which the decal will be affixed is painted and the decal is applied. 

After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry. 

Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces. 

It is perfect even for poorly made decals from Eastern European models. 

Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.

• TAMIYA COLOR ENAMEL X-20 Thinner 40ml MODEL KIT PAINT NEW.

Colour: Tamiya Pearl Clear Spray TS-65
Tamiya Paint Code: TS-65
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)

Colour: Flat Clear
Tamiya Paint Code: TS-80
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)

Colour: Semi Gloss Clear
Tamiya Paint Code: TS-79
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)